V4301 Automatic Liquid Soap Dispenser 1300 ml | Liquid Nozzle | Applicable for Liquid Soap, Hand Gel Sanitizer, Alcohol | HOSPECO


SKU: 80786 Category:


Hand hygiene is regarded as a natural way to prevent the spread of known germs and viruses, especially COVID-19. Frequent hand washing with soap is highly recommended.



  • Size: 150 x 108 x 259 mm
  • Dispenser Weight: 0.84 kg
  • Volume: 1300 ml
  • Sensing Distance: 0-10 cm
  • Batteries: 4pcs D batteries
  • Nozzle/s Available:
  1. Liquid: Suitable for Liquid Soap & Gel Sanitizer



  • Automatic / Touchless Experience: This hands-free soap dispenser comes with smart motion infrared sensor that provides you with a touchless experience (safer from germs, bacteria, and viruses).
  • Heavy Duty, Durable Material: Made of eco-friendly, high-grade material for long lasting performance even for commercial and industrial use in high traffic areas.
  • Sleek and modern-looking
  • No messy spills: Anti-dripping & no trailing
  • With one drop – two drop option switch
  • Easy to Refill: Allows you to see the amount of the liquid content so you can refill when necessary.
  • Space Saving: Solves the clutter of bathroom bottles in the shelf, kitchen sink or wash basin.
  • Safety Lock (Optional Feature): Locking design, equipped with a key, to avoid theft and pilferage in public places.
  • Easy Installation: Can be wall-mounted or installed on a standee. All screws and/or adhesive needed are included. Also comes with an instruction manual.
  • Recommended Use: This commercial grade dispenser is suitable for residential, commercial and industrial use (in the washrooms, laundry areas, kitchens, offices, shopping malls, hospitals, hotels, restaurants and other public areas).



  1. Use the mounting plate as template to mark the position.
  2. Drill two 5mm holes and insert plugs into the holes.
  3. Fasten the mounting plate on the wall with the provided screws.
  4. Insert 4 pcs batteries into battery compartment with proper polarity as shown on compartment (alkaline battery is recommended).
  5. Open the cover and fill in the liquid to the container.
  6. Put your hand under the sensor 0-10 cm, and let the dispenser start working until liquid soap come out from nozzle.
  7. When you use the dispenser for the first time, there will be some air in the pump, you need the dispenser to work several times until liquid soap drops down.



  • Do not install the dispenser above the mirror surface or above flowing water.
  • Do not install the dispenser with less than 12 inch height beneath the table.
  • The sensor is at the base of dispenser. The effect range is from 0-10 cm underneath the sensor.
  • Direct sunlight or exposed locations can destroy the infrared sensor of the product.
  • Low voltage indicator. When you find the LED light twinkle continually while dispenser is on standby mode, battery replacement is necessary.
  • Do not use alcohol or other chemistry liquid.
  • This product doesn’t have waterproof function, please place product far from dampness.



  1. Check the battery whether the power has been used up or not at the right polarity.
  2. Power switch turn off.



  1. If there is dust in the container, please clean the container then refill the liquid.
  2. Do not use water to wash the dispenser, clean the surface using wet towel, use dry towel to clean the battery compartment.
  3. If not in use, please fill in some water, then operate dispenser several times to clean the output pipe and take out the battery
  4. If liquid is congealed, fill in some warm water, wait few minutes, then operate dispenser and push out the water.


HOSPECO is your hygiene, sanitary, and cleaning solutions!

HOSPECO, keeping us safe.

Additional information

Weight 1.5 kg
Dimensions 10.5 × 16.2 × 25.6 cm