AYT Manual Foam Soap Dispenser 1000 ml | Foam Nozzle | Applicable for Foaming Soap | HOSPECO
₱1,350.00
Description
Hand hygiene is regarded as a natural way to prevent the spread of known germs and viruses, especially COVID-19. Frequent hand washing with soap is highly recommended.
SPECIFICATIONS:
- Size: 130 x 120 x 270 mm
- Dispenser Weight: 0.8 kg
- Volume: 1000 ml
- Nozzle/s Available:
- Liquid: Suitable for Liquid Soap, Gel Sanitizer, Alcohol
- Foam: Suitable for Foaming Soap
FEATURES:
- Neat and Compact Push Dispensing System
- Heavy Duty, Durable Material: Made of eco-friendly, high-grade material for long lasting performance even for commercial and industrial use in high traffic areas.
- Sleek and modern-looking
- No messy spills
- Easy to Refill: Allows you to see the amount of the liquid content so you can refill when necessary.
- Space Saving: Solves the clutter of bathroom bottles in the shelf, kitchen sink or wash basin.
- Easy Installation: Wall-mounted. All screws and/or adhesive needed are included. Also comes with an instruction manual.
- Recommended Use: This commercial grade dispenser is suitable for residential, commercial and industrial use (in the washrooms, laundry areas, kitchens, offices, shopping malls, hospitals, hotels, restaurants and other public areas).
INSTALLATION:
Tape Mounting:
- Make sure mounting surface is flat, clean and dry. Tape mounting is only recommended for mirrors or similar surfaces.
- Remove protective backing from adhesive tapes and press dispenser firmly against the mounting surface for about 15 seconds. Open front cover and press directly for an additional 15 seconds and allow 4 hours before use.
- To open dispenser, push the latch up from the bottom of the dispenser and pull cover forward away from the wall or mirror.
Screw Mounting:
- Hold dispenser against wall in desired location, open cover and mark the holes through the backplate.
- Install provided anchors into drywall and secure the dispenser with screws provided.
Cartridge Installation Instruction:
- Open dispenser, push the latch up from the bottom of the dispenser and pull cover forward away from the wall or mirror.
- Place the cartridge on the platform and insert the pump nozzle firmly in the guides.
- Close the dispenser cover securely. It is now ready to use.
Additional information
Weight | 1.5 kg |
---|---|
Dimensions | 15 × 15 × 30 cm |
Nozzle | Liquid, Foam |